|
341870376
|
0419400
|
2016-10-26
|
2485 HIGHWAY 24, GLOSTER, MS, 39638
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2016-10-27
|
| Emphasis |
L: LEAD, N: LEAD
|
| Case Closed |
2017-03-29
|
Related Activity
| Type |
Referral |
| Activity Nr |
1148832 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2017-02-23 |
| Abatement Due Date |
2017-02-27 |
| Current Penalty |
4563.0 |
| Initial Penalty |
7605.0 |
| Final Order |
2017-03-27 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc. (a) On or about October 26, 2016 the rotating knife sharpener was not equipped with a guard to protect employees wearing loose clothing that could resulting into struck-by hazards. |
|
|
|
341851657
|
0419400
|
2016-10-18
|
2485 HIGHWAY 24 31.19105614; -90.9557002, GLOSTER, MS, 39638
|
|
| Inspection Type |
Referral
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2016-10-19
|
| Emphasis |
L: FORKLIFT, L: LEAD, N: AMPUTATE, N: LEAD
|
| Case Closed |
2017-01-23
|
Related Activity
| Type |
Referral |
| Activity Nr |
1145580 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
1186799 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 D04 I |
| Issuance Date |
2016-12-20 |
| Abatement Due Date |
2017-01-12 |
| Current Penalty |
7482.6 |
| Initial Penalty |
12471.0 |
| Final Order |
2017-01-16 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) At the oversize conveyor - On or about October 12, 2016, there was no lockout/tagout device affixed to the control for the oversize conveyor. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 B02 |
| Issuance Date |
2016-12-20 |
| Abatement Due Date |
2017-01-05 |
| Current Penalty |
4275.6 |
| Initial Penalty |
7126.0 |
| Final Order |
2017-01-16 |
| Nr Instances |
1 |
| Nr Exposed |
34 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) In the break room - On or about Oct 25, 2016, two re-locatable power taps (RLPT) on the left side entering the break room were daisy chained together. A third RLPT was plugged into an extension cord reel. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100132 D02 |
| Issuance Date |
2016-12-20 |
| Abatement Due Date |
2017-01-12 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-01-16 |
| Nr Instances |
1 |
| Nr Exposed |
34 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: (a) At the facility - On or about October 19, 2016, the employer did not have the required hazard assessment for the workplace, there was no person certifying that the evaluation had been performed. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100265 D02 I D |
| Issuance Date |
2016-12-20 |
| Abatement Due Date |
2016-12-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-01-16 |
| Nr Instances |
1 |
| Nr Exposed |
34 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.265(d)(2)(i)(d): Sign(s) were not posted prohibiting unauthorized foot or vehicle traffic in log unloading and storage area(s): (a) Log storage and handling yard - On or about October 19, 2016, there was no signs posted prohibiting unauthorized foot or vehicle traffic in the yard. |
|
|
|
341581338
|
0419400
|
2016-06-20
|
2485 HIGHWAY 24 N 31.19110; -90.95566 W, GLOSTER, MS, 39638
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2016-06-23
|
| Emphasis |
L: FORKLIFT, N: AMPUTATE
|
| Case Closed |
2017-01-18
|
Related Activity
| Type |
Referral |
| Activity Nr |
1102499 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C01 |
| Issuance Date |
2016-12-20 |
| Abatement Due Date |
2017-01-12 |
| Current Penalty |
7482.6 |
| Initial Penalty |
12471.0 |
| Final Order |
2017-01-17 |
| Nr Instances |
1 |
| Nr Exposed |
26 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Old Saw Mill, Throughout - On or about June 20, 2016 no energy control program, including machine-specific procedures, had been fully developed or implemented to protect employees from electrical shock or unexpected start-up while performing maintenance on the following: the Head (rig) Saw, the Log Carriage, the Edger, the two Chippers, the Trim Saws, the Roller Bed, the Lumber Conveying Chains, the Shaker Screen, the Vibrators, etc. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100265 C05 II |
| Issuance Date |
2016-12-20 |
| Abatement Due Date |
2017-01-12 |
| Current Penalty |
3634.2 |
| Initial Penalty |
6057.0 |
| Final Order |
2017-01-17 |
| Nr Instances |
1 |
| Nr Exposed |
26 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.265(c)(5)(ii): Stairways were not provided with a standard handrail on at least one side or on any open side: (a) Old Saw Mill; West of Scale House-Office, at North end of Employee Break Room - There were no standard handrails on either side of the 47 inch wide by 27 inch high by 4 risers high concrete steps leading to and from the north end of the Employee Break Room. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100022 B01 |
| Issuance Date |
2016-12-20 |
| Abatement Due Date |
2017-01-12 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-01-17 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(b)(1): 29 CFR 1910.22(b)(1): Aisles and passageways were not kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. (a) Scale House - Office, on floor between Office Manager's Desk and the Hewlett-Packard Printer-Scanner - On or about June 21, 2016 employees were exposed to a tripping hazard due to an unprotected round black cord running along the floor. |
|
|
