| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2014-08-19
|
| Emphasis |
L: FALL, P: FALL
|
| Case Closed |
2017-02-08
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19260501 B10 |
| Issuance Date |
2014-09-19 |
| Abatement Due Date |
2014-09-29 |
| Current Penalty |
1530.0 |
| Initial Penalty |
1530.0 |
| Final Order |
2014-10-15 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.501(b)(10): "Roofing work on Low-slope roofs." Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see Appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted. (a) Roof - On or about August 19, 2014 two employees were exposed to a fall hazard while working on a low-slope roof with no fall protection. The height of the roof was 14 feet 1 inches above concrete. |
|
|
