346772437
|
0419400
|
2023-06-12
|
820 HWY 35 N., FOREST, MS, 39074
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2023-06-12
|
Case Closed |
2023-12-07
|
Related Activity
Type |
Referral |
Activity Nr |
2039276 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Other |
Standard Cited |
19040041 A02 |
Issuance Date |
2023-08-01 |
Abatement Due Date |
2023-09-14 |
Current Penalty |
1120.0 |
Initial Penalty |
2232.0 |
Final Order |
2023-08-25 |
Nr Instances |
1 |
Nr Exposed |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1904.41(a)(2):Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form. a) Jobsite - On or about June 12, 2023 , the employer failed during calendar year 2022, to electronically submit information from their OSHA Form 300A. |
|
|
345468730
|
0419400
|
2021-08-04
|
403 S CHURCH AVENUE, LOUISVILLE, MS, 39339
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2021-08-04
|
Emphasis |
N: AMPUTATE
|
Case Closed |
2021-11-08
|
Related Activity
Type |
Referral |
Activity Nr |
1792960 |
Safety |
Yes |
|
|
344606470
|
0419400
|
2020-02-04
|
807 HWY 16 W., CARTHAGE, MS, 39051
|
|
Inspection Type |
Referral
|
Scope |
Complete
|
Safety/Health |
Safety
|
Close Conference |
2020-02-04
|
Emphasis |
N: AMPUTATE
|
Case Closed |
2023-03-29
|
Related Activity
Type |
Referral |
Activity Nr |
1538595 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19100305 C04 |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-08-19 |
Current Penalty |
3180.0 |
Initial Penalty |
6361.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
6 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.305(c)(4): Faceplates for flush-mounted snap switches. Snap switches mounted in boxes did not have faceplates installed so as to completely cover the opening and seat against the finished surface. a. Wrap Room - On or about February 4, 2019 the light switch at the entrance did not have a faceplate. |
|
Citation ID |
03001 |
Citaton Type |
Repeat |
Standard Cited |
19040004 A |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-08-19 |
Current Penalty |
2121.0 |
Initial Penalty |
4242.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
606 |
Related Event Code (REC) |
Referral |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1904.4(a): The employer did not keep records of work related fatalities, injuries or illnesses as required in the general recording criteria on the OSHA form 300 and OSHA form 300A or equivalent: a. Triple V, Inc./Cash Saver # 23 - On or about February 4, 2020 the employer was not maintaining OSHA Form 300, Log of Work-Related Injuries and Illnesses and OSHA Form 300A, Summary of Work-Related Injuries and Illnesses as required. The Triple V, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1904(a), which was contained in OSHA inspection number 1210916, citation number 2, item number 1 and was affirmed as a final order on June 29, 2017 with respect to a workplace located at Triple V, Inc/Vowell's Market Place, 19 E Main St., Noxapater, MS 39346. |
|
Citation ID |
03002 |
Citaton Type |
Repeat |
Standard Cited |
19040039 A02 |
Issuance Date |
2020-07-28 |
Current Penalty |
0.0 |
Initial Penalty |
21206.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
26 |
Related Event Code (REC) |
Referral |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. a. Triple V/Cash Saver # 23 - On or about January 20, 2020, a work related finger amputation was not reported to OSHA within 24 hours. The Triple V, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.39(a)(2) which was contained in OSHA inspection number 1210915, citation number 2, item number 1 and was affirmed as a final order on June 29, 2017, with respect to a workplace located at Triple V, Inc./Vowell's Market Place, 19 E Main St., Noxapater, MS 39346. |
|
Citation ID |
03003A |
Citaton Type |
Repeat |
Standard Cited |
19100212 A01 |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-08-19 |
Current Penalty |
65054.0 |
Initial Penalty |
134937.0 |
Final Order |
2020-08-26 |
Nr Instances |
2 |
Nr Exposed |
6 |
Related Event Code (REC) |
Referral |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s). a. Meat Department - On or about February 4, 2020 machine guarding on the Hobart meat saws were inadequate in that the guard was not adjusted only as high as necessary for the piece being cut. |
|
Citation ID |
03003B |
Citaton Type |
Repeat |
Standard Cited |
19100212 A03 III |
Issuance Date |
2020-07-28 |
Current Penalty |
0.0 |
Initial Penalty |
10603.0 |
Final Order |
2020-08-26 |
Nr Instances |
2 |
Nr Exposed |
6 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.212(a)(3)(iii): Special hand tools for placing and removing material were not provided to permit easy handling of material without the operator placing a hand in the danger zone: a. Meat Department - On or about February 4, 2020 pusher plates were not used for cutting small or narrow cuts of meats on the meat saws. |
|
Citation ID |
03004A |
Citaton Type |
Repeat |
Standard Cited |
19101200 E01 |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-10-19 |
Current Penalty |
5302.0 |
Initial Penalty |
10604.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
6 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii). a. Triple V, Inc./Cash Saver #23 - On or about February 4, 2020 a written hazard communication program was not developed and implemented for hazardous chemicals such as, but not limited to, Sani Quat II Sanitizer. The Triple V, Inc was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.1200(e)(1), which was contained in OSHA inspection number 1210830, citation number 2, item number 1 and was affirmed as a final order on 06/26/2017, with respect to a workplace located at Triple V, Inc./Cash Saver, 261 Devereaux Dr., Natchez, MS 39120. |
|
Citation ID |
03004B |
Citaton Type |
Other |
Standard Cited |
19101200 H01 |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-10-19 |
Current Penalty |
0.0 |
Initial Penalty |
1190.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
6 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a. Triple V, Inc./Cash Saver - On or about February 4, 2020 employees had not been trained on the hazardous chemicals used in their work area exposing employees to chemical hazards. |
|
Citation ID |
04001 |
Citaton Type |
Other |
Standard Cited |
19100303 B02 |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-08-19 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
2 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling. a. Store Manager Office - On or about February 4, 2020 a relocatable power tap located under a desk next to the store manager's desk was daisy chained (fire hazard). |
|
Citation ID |
04002 |
Citaton Type |
Other |
Standard Cited |
19100305 B01 II |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-08-19 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
6 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed. a. Meat Department - On or about February 4, 2020 the Hobart meat saw, Model 5700 had an unused opening on the upper side where the power cord entered the saw. |
|
Citation ID |
04003 |
Citaton Type |
Other |
Standard Cited |
19100305 G01 IV A |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-08-19 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
26 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure. a. Break Room - On or about February 4, 2020 a microwave was plugged into an extension cord that was routed from the breakroom to a receptacle located in the meat department. The extension cord was used as permanent wiring for the microwave. |
|
Citation ID |
04004 |
Citaton Type |
Other |
Standard Cited |
19100305 G01 IV B |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-08-19 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2020-08-26 |
Nr Instances |
2 |
Nr Exposed |
26 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and/or cables were run through holes in walls, ceilings, or floors: a. Breakroom - On or about February 4, 2020 a microwave was plugged into extension cords that were routed through the breakroom ceiling and the meat department ceiling. |
|
Citation ID |
04005 |
Citaton Type |
Other |
Standard Cited |
19101200 E01 I |
Issuance Date |
2020-07-28 |
Abatement Due Date |
2020-10-19 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2020-08-26 |
Nr Instances |
1 |
Nr Exposed |
26 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet. a. Triple V, Inc./Cash Saver - on or about February 4, 2020 the employer had not developed a chemical inventory list for the hazardous chemicals used in the facilities. |
|
|
342109162
|
0419400
|
2017-02-15
|
19 EAST MAIN ST., NOXAPATER, MS, 39346
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Health
|
Close Conference |
2017-02-15
|
Emphasis |
N: AMPUTATE
|
Case Closed |
2017-07-18
|
Related Activity
Type |
Referral |
Activity Nr |
1181848 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19100212 A01 |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
11408.0 |
Initial Penalty |
11408.0 |
Final Order |
2017-06-30 |
Nr Instances |
4 |
Nr Exposed |
4 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. (a) On or about February 14, 2017 machine guarding on the Hobart Meat cutting saw was inadequate in that the guard was not adjusted to the height/thickness of the meat being cut. |
|
Citation ID |
02001 |
Citaton Type |
Other |
Standard Cited |
19040004 A |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
1385.0 |
Initial Penalty |
1385.0 |
Final Order |
2017-06-30 |
Nr Instances |
1 |
Nr Exposed |
200 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1904.4(a): The employer did not record each work-related fatality, injury or illness case that resulted in the general recording criteria on the OSHA Form 300 or equivalent. Abatement Certification and Documentation is required Triple V Natchez, MS: On or about February 14, 2014 the employer did not record a injury or illness on the OSHA 300 log because they do not maintain the log. |
|
|
342109154
|
0419400
|
2017-02-15
|
19 EAST MAIN ST., NOXAPATER, MS, 39346
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2017-02-15
|
Emphasis |
N: AMPUTATE
|
Case Closed |
2017-07-19
|
Related Activity
Type |
Referral |
Activity Nr |
1181848 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001A |
Citaton Type |
Serious |
Standard Cited |
19100132 D01 |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
5079.0 |
Initial Penalty |
5079.0 |
Final Order |
2017-06-30 |
Nr Instances |
1 |
Nr Exposed |
2 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). (a) Establishment - On or about February 15, 2017, employees cleaning the Hobart Band Saw Model 5614 were exposed to the hazards of eye injury from contact with corrosive cleaning chemicals. Employees were not provided and required to wear eye protection. |
|
Citation ID |
01001B |
Citaton Type |
Serious |
Standard Cited |
19100132 D02 |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2017-06-30 |
Nr Instances |
1 |
Nr Exposed |
2 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment. (a) Establishment - On or about February 15, 2017, employees cleaning the Hobart Band Saw Model 5614, were exposed to the hazards of eye injury from contact with corrosive cleaning chemicals. The Employer did not certify that workplace hazard assessment has been performed. |
|
Citation ID |
02001 |
Citaton Type |
Other |
Standard Cited |
19040039 A02 |
Issuance Date |
2017-06-01 |
Current Penalty |
8465.0 |
Initial Penalty |
8465.0 |
Final Order |
2017-06-30 |
Nr Instances |
1 |
Nr Exposed |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1904.39(a)(2): The employer failed to report the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, within (24) twenty-four hours: (a) Job Site - On or about February 4, 2017 the employer did not report a hospitalization of a work related incident to OSHA within 24 hours. |
|
Citation ID |
02002 |
Citaton Type |
Other |
Standard Cited |
19101200 E01 |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2017-06-29 |
Nr Instances |
1 |
Nr Exposed |
2 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Establishment - On or about February 15, 2017, employees cleaning the Hobart Band Saw MODEL 5614, were exposed to corrosive chemicals such as Signet hard Surface Sanitizer and the employer had not developed, implemented, and maintained a written hazard communication program. |
|
|
342105723
|
0419400
|
2017-02-14
|
261 DEVEREAUX DR., NATCHEZ, MS, 39120
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Health
|
Close Conference |
2017-02-14
|
Emphasis |
N: AMPUTATE
|
Case Closed |
2018-01-25
|
Related Activity
Type |
Referral |
Activity Nr |
1181043 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19100212 A03 II |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
11408.0 |
Initial Penalty |
11408.0 |
Final Order |
2017-06-26 |
Nr Instances |
2 |
Nr Exposed |
2 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. a) On or about February 14, 2017 the Hobart vertical band saw was not equipped with a guard. |
|
|
342108305
|
0419400
|
2017-02-14
|
261 DEVEREAUX DR., NATCHEZ, MS, 39120
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2017-02-14
|
Emphasis |
N: AMPUTATE
|
Case Closed |
2018-02-02
|
Related Activity
Type |
Referral |
Activity Nr |
1181043 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001A |
Citaton Type |
Serious |
Standard Cited |
19100132 D01 |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
5079.0 |
Initial Penalty |
5079.0 |
Final Order |
2017-06-23 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment. (a) Establishment - On or about February 14, 2017, employee cleaning the Hobart meat Band Saw SERIAL 27-1021-168, was exposed to the hazards of eye injury from contact with corrosive cleaning chemicals. Employee was not provided and required to wear eye protection. |
|
Citation ID |
01001B |
Citaton Type |
Serious |
Standard Cited |
19100132 D02 |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2017-06-23 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment. (a) Establishment - On or about February 14, 2017, employee cleaning the Hobart Band Saw SERIAL 27-1021-168, was exposed to the hazards of eye injury from contact with corrosive cleaning chemicals. The Employer did not certify that workplace hazard assessment has been performed. |
|
Citation ID |
02001 |
Citaton Type |
Other |
Standard Cited |
19101200 E01 |
Issuance Date |
2017-06-01 |
Abatement Due Date |
2017-06-23 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2017-06-23 |
Nr Instances |
1 |
Nr Exposed |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Establishment - On or about February 14, 2017, employee was cleaning the Hobart Band Saw SERIAL 27-1021-168, was exposed to corrosive chemicals such as Sani Quat II Sanitizer and the employer had not developed, implemented, and maintained a written hazard communication program. |
|
|