|
344431051
|
0419400
|
2019-10-23
|
414 COUNTY ROAD 2790, GUNTOWN, MS, 38849
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2019-11-05
|
| Case Closed |
2020-03-04
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1510039 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Other |
| Standard Cited |
19100022 D01 |
| Issuance Date |
2020-02-03 |
| Abatement Due Date |
2020-02-26 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2020-03-03 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces were inspected, regularly and as necessary, and maintained in a safe condition: (a) Sewing - On or about October 23 the company failed to maintain the area where the sewers work is kept free from tripping hazards. |
|
|
|
340893742
|
0419400
|
2015-09-02
|
414 COUNTY ROAD 2790, GUNTOWN, MS, 38849
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2015-09-02
|
| Case Closed |
2015-11-13
|
Related Activity
| Type |
Referral |
| Activity Nr |
1014232 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2015-09-23 |
| Current Penalty |
7000.0 |
| Initial Penalty |
14000.0 |
| Final Order |
2015-10-06 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s) (a) Button Machine Area - On or about August 25, 2015 the guard on the button machine did not prevent employee's finger from getting into the danger zone during operating cycle. H. M. Richards was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(3)(ii), which was contained in OSHA inspection number 997570, citation number 1, item number 1 and was affirmed as a final order on March 12, 2015 with respect to a workplace located at 145 Towery Road, Guntown, MS 38849. |
|
|
|
340409556
|
0419400
|
2015-02-17
|
414 COUNTY ROAD 2790, GUNTOWN, MS, 38849
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2015-02-17
|
| Emphasis |
N: AMPUTATE, N: DUSTEXPL
|
| Case Closed |
2015-05-19
|
Related Activity
| Type |
Referral |
| Activity Nr |
956148 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 B02 |
| Issuance Date |
2015-02-24 |
| Abatement Due Date |
2015-03-18 |
| Current Penalty |
3500.0 |
| Initial Penalty |
7000.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
1 |
| Nr Exposed |
260 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Sewing department - On or about February 10, 2015, a Jiffy Steamer near a time clock was wired with a 3 conductor 16 AWG gage flexible cord in place of the manufacturer's 3 conductor 14 AWG gage flexible cord that was supplied with the steamer. |
|
|
|
339975708
|
0419400
|
2014-10-02
|
145 TOWERY ROAD, GUNTOWN, MS, 38849
|
|
| Inspection Type |
Fat/Cat
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2014-12-09
|
| Emphasis |
L: FORKLIFT, N: AMPUTATE, N: DUSTEXPL
|
| Case Closed |
2015-05-19
|
Related Activity
| Type |
Accident |
| Activity Nr |
911828 |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2015-02-27 |
| Current Penalty |
4000.0 |
| Initial Penalty |
5500.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) 414 CR 2790 in Guntown, MS - On or about October 7, 2014, in the mill department, the "T" nut machine was not guarded to prevent employee's hand from contacting the point of operation. |
|
| Citation ID |
01002 |
| Citaton Type |
Other |
| Standard Cited |
19100215 B09 |
| Issuance Date |
2015-02-27 |
| Abatement Due Date |
2015-03-23 |
| Current Penalty |
1000.0 |
| Initial Penalty |
3300.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
2 |
| Nr Exposed |
9 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) 414 CR 2790 in Guntown, MS - In the maintenance shop, on or about October 7, 2014, the distance of the adjustable tongue guard on the Performance Tool 6 inch bench grinder was .75 inch on the left and .5 inch on the right. b) 414 CR 2790 in Guntown, MS - In the maintenance shop, on or about October 7, 2014, the distance of the adjustable tongue guard on the scissor grinder was .375 inch on the left and 1 inch on the right. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 G02 I |
| Issuance Date |
2015-02-27 |
| Current Penalty |
4200.0 |
| Initial Penalty |
7000.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
1 |
| Nr Exposed |
40 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: a) 145 Towery Road in Guntown, MS - On or about October 2, 2014, employees were exposed to electrical burns and shocks because an energized wire was hanging in the door opening and path through the door used to enter and exit the building. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100304 A01 |
| Issuance Date |
2015-02-27 |
| Current Penalty |
2450.0 |
| Initial Penalty |
4400.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(a)(1): Conductors used as grounded conductors were not identifiable and distinguishable from all other conductors: a) 145 Towery Road in Guntown, MS - On or about October 1, 2014, the grounded conductor was the same color as the other conductors and there was no other markings for identification. |
|
| Citation ID |
01005 |
| Citaton Type |
Serious |
| Standard Cited |
19100304 G05 |
| Issuance Date |
2015-02-27 |
| Current Penalty |
2450.0 |
| Initial Penalty |
4400.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a) 414 CR 2790 in Guntown, MS - On or about October 7, 2014, in the shipping department, the floor fan was missing the ground pin on the plug. |
|
| Citation ID |
01006A |
| Citaton Type |
Serious |
| Standard Cited |
19100332 B01 |
| Issuance Date |
2015-02-27 |
| Abatement Due Date |
2015-03-23 |
| Current Penalty |
6000.0 |
| Initial Penalty |
7000.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
1 |
| Nr Exposed |
9 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments: a) 145 Towery Road in Guntown, MS - On or about October 1, 2014 at the gang rib saw number 1, employees were not trained as a qualified person to perform the assigned job assignment such as; working with electrical equipment, removing wiring, testing fuses, checking voltages. |
|
| Citation ID |
01006B |
| Citaton Type |
Serious |
| Standard Cited |
19100334 C01 |
| Issuance Date |
2015-02-27 |
| Abatement Due Date |
2015-03-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
250 |
| Nr Exposed |
9 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.334(c)(1): Unqualified persons performed testing work on electric circuits or equipment. a) 414 CR 2790 in Guntown, MS - On or about October 9, 2014, employees use a volt-ohm meter to test for voltages on sewing machines and other types of equipment, change fuses, check voltages of 110 to 480 volts 3 phase, circuit boards, ran electric from buss plugs to equipment such as sewing machines, saws, routers, etc. |
|
| Citation ID |
01007 |
| Citaton Type |
Serious |
| Standard Cited |
19100333 B02 |
| Issuance Date |
2015-02-27 |
| Current Penalty |
6000.0 |
| Initial Penalty |
7000.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Accident |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.333(b)(2): While an employee was exposed to contact with parts of fixed electric equipment or circuits which were deenergized, the circuits energizing the parts were not locked out or tagged or both in accordance with the requirements of this paragraph (b) of 29 CFR 1910.333(b)(2): a) 145 Towery Road in Guntown, MS - On or about October 1, 2014, the buss plug disconnect to the gang rip saw #1 did not have a written Lockout/Tagout procedure that included among others; the deenergizing of equipment, application of locks and tags, and verification of the deenergized condition for performing the task of removing the feeder wires from the saw. |
|
| Citation ID |
02001 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 F02 |
| Issuance Date |
2015-02-27 |
| Current Penalty |
7000.0 |
| Initial Penalty |
16500.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
2 |
| Nr Exposed |
9 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a) 145 Towery Road in Guntown, MS - On or about October 2, 2014, a circuit breaker panel was not labeled to indicate the purpose of each breaker of which a couple of circuit breakers went to a floor mounted scissor lift. b) 414 CR 2790 in Guntown, MS - On or about October 7, 2014, a main 1600 amp switchboard located in upholstery at the end of the tunnel had 2 circuit breakers feeding sub-panels were not labeled. H.M. Richards, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.303(f)(2), which was contained in OSHA inspection number 315302596, citation number 1, item number 1 and was affirmed as a final order on May 17, 2011, with respect to a workplace located at 414 County Road 2790 in Guntown, MS 38849. |
|
| Citation ID |
03001 |
| Citaton Type |
Other |
| Standard Cited |
19100305 G02 III |
| Issuance Date |
2015-02-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2015-03-12 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) 414 CR 2790 in Guntown, MS - On or about October 7, 2014, in the shipping department, the flexible cord on a 42 inch diameter fan on the floor had a defective strain relief on the plug end and where the cord entered the fan housing. |
|
|
|
315302596
|
0419400
|
2011-04-26
|
414 COUNTY ROAD 2790, GUNTOWN, MS, 38849
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2011-04-28
|
| Emphasis |
N: SSTARG10, S: NOISE, S: POWERED IND VEHICLE
|
| Case Closed |
2011-05-23
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 F02 |
| Issuance Date |
2011-05-06 |
| Abatement Due Date |
2011-05-11 |
| Current Penalty |
1400.0 |
| Initial Penalty |
2025.0 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
01 |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100022 D01 |
| Issuance Date |
2011-05-06 |
| Abatement Due Date |
2011-05-11 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
01 |
|
|
|
308768001
|
0419400
|
2005-07-20
|
414 COUNTY ROAD 2790, GUNTOWN, MS, 38849
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2005-07-20
|
| Case Closed |
2005-07-20
|
Related Activity
| Type |
Inspection |
| Activity Nr |
306658329 |
|
|
|
306658329
|
0419400
|
2005-01-26
|
414 COUNTY ROAD 2790, GUNTOWN, MS, 38849
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Health
|
| Close Conference |
2005-03-17
|
| Emphasis |
N: SSTARG03
|
| Case Closed |
2005-04-21
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100305 B01 |
| Issuance Date |
2005-03-30 |
| Abatement Due Date |
2005-04-04 |
| Current Penalty |
800.0 |
| Initial Penalty |
1300.0 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
02 |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 C04 I |
| Issuance Date |
2005-03-30 |
| Abatement Due Date |
2005-04-04 |
| Current Penalty |
800.0 |
| Initial Penalty |
1300.0 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
02 |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19101200 F05 I |
| Issuance Date |
2005-03-30 |
| Abatement Due Date |
2005-04-25 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
01 |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19101200 F05 II |
| Issuance Date |
2005-03-30 |
| Abatement Due Date |
2005-04-25 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
01 |
|
|
