|
346225378
|
0419400
|
2022-09-15
|
872 DEPOT STREET, WOODVILLE, MS, 39669
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2022-09-15
|
| Case Closed |
2023-04-07
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1560928 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100147 C06 II |
| Issuance Date |
2023-03-13 |
| Abatement Due Date |
2023-04-25 |
| Current Penalty |
312.0 |
| Initial Penalty |
312.0 |
| Final Order |
2023-04-07 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(ii):The employer did not certify that periodic inspections of the energy control procedures had been performed: a) Jobsite - On or about September 15, 2022 the employer did not certify that periodic inspections for equipment were performed, exposing employees to amputation hazards. Southern Packaging, Inc. was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA Inspection #1560928, Citation 2, Item 1, issued on February 1, 2022, with respect to a workplace located at 872 Depot Street Woodville, MS which became a final order on March 15, 2022. |
|
| Citation ID |
01002 |
| Citaton Type |
Repeat |
| Standard Cited |
19100304 B03 II C 3 |
| Issuance Date |
2023-03-13 |
| Current Penalty |
312.0 |
| Initial Penalty |
312.0 |
| Final Order |
2023-04-07 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(b)(3)(ii)(C)(3): Each cord set, attachment cap, plug, and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, were not visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage. a) Jobsite - On or about September 15, 2022 the employer did not ensure that a cord by the scragg edger missing a ground pin was inspected before use, exposing employees to shock hazards. Southern Packaging, Inc. was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA Inspection #1560928, Citation 2, Item 2, issued on February 1, 2022, with respect to a workplace located at 872 Depot Street Woodville, MS which became a final order on March 15, 2022. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2023-03-13 |
| Abatement Due Date |
2023-04-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2023-04-07 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. a) Jobsite - On or about September 15, 2022 the employer did not conduct annual energy control procedure inspections for some of their equipment, exposing employees to amputation hazards. |
|
|
|
345609283
|
0419400
|
2021-10-27
|
872 DEPOT STREET, WOODVILLE, MS, 39669
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2021-10-27
|
| Emphasis |
L: FORKLIFT
|
| Case Closed |
2023-03-10
|
Related Activity
| Type |
Referral |
| Activity Nr |
1826895 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2022-02-01 |
| Abatement Due Date |
2022-02-24 |
| Current Penalty |
7831.3 |
| Initial Penalty |
13052.0 |
| Final Order |
2022-03-15 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Jobsite - On or about October 27, 21 the employer did not ensure that the procedures for locking out the Scragg Edger was utilized, exposing employees to amputation hazards. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100147 D04 I |
| Issuance Date |
2022-02-01 |
| Abatement Due Date |
2022-02-24 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-03-15 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. (a) Jobsite - On or about October 27, 2021 the employer did not ensure that lockout devices were affixed to the Scragg Edger when employees cleared jams or changed blades, exposing employees to amputation hazards. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100147 C06 II |
| Issuance Date |
2022-02-01 |
| Abatement Due Date |
2022-02-24 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-03-15 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(ii):The employer did not certify that periodic inspections of the energy control procedures had been performed: (a) Jobsite - On or about October 27, 2021 the employer did not certify that a periodic inspection of the energy control procedures for the Scragg edger had been performed, exposing employees to amputation hazards. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100304 B03 II C 3 |
| Issuance Date |
2022-02-01 |
| Abatement Due Date |
2022-02-24 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-03-15 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(b)(3)(ii)(C)(3): Each cord set, attachment cap, plug, and receptacle of cord sets, and any equipment connected by cord and plug, was not visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage: a) Jobsite - On or about October 27, 2021 the employer did not inspect a cord next to the edger saw that was missing a ground pin and did not remove it from service, exposing employees to shock hazards. |
|
| Citation ID |
02003 |
| Citaton Type |
Other |
| Standard Cited |
19100305 G02 III |
| Issuance Date |
2022-02-01 |
| Abatement Due Date |
2022-02-24 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-03-15 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(2)(iii):Flexible cords and cables were not connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints and/or terminal screws. (a) Jobsite - On or about October 27, 2021 the employer did not ensure the cable on a fan by the Scragg edger had strain relief provided, exposing employees to electrical shock. |
|
|
|
340674076
|
0419400
|
2015-05-05
|
P.O. BOX 666, WOODVILLE, MS, 39669
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2015-05-20
|
| Emphasis |
L: HINOISE
|
| Case Closed |
2016-03-25
|
Related Activity
| Type |
Referral |
| Activity Nr |
980116 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100023 A08 |
| Issuance Date |
2015-07-21 |
| Current Penalty |
1728.0 |
| Initial Penalty |
3600.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
2 |
| Nr Exposed |
4 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.23(a)(8): Floor hole(s), into which persons could accidentally walk, were not guarded by standard railings with standard toeboards on all exposed sides or by floor hole covers of standard strength and construction: (a) Scragg mill - On or about May 05, 2015 employees were exposed to floor opening to conveyer measuring 34 inches high and 121 inches long on both sides of the conveyer. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100095 G01 |
| Issuance Date |
2015-07-21 |
| Abatement Due Date |
2015-08-12 |
| Current Penalty |
2160.0 |
| Initial Penalty |
4500.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
4 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(g)(1): The employer did not establish and maintain an audiometric testing program as provided by 29 CFR 1910.95(g) by making audiometric testing available to all employees whose exposures equal or exceed an 8-hour time-weighted average of 85 decibels: (a) Edger operator - On or about May 20, 2015 employees were exposed to continuous noise at 367% of the permissible daily noise (8-hour time-weighted average sound level of 90 dBA) or an equivalent sound level of 99.4 during the 420 minute sampling period. Exposure calculation included a zero increment for the time not sampled. (a) Chipper operator - On or about May 20, 2015 employees were exposed to continuous noise at 97.4% of the permissible daily noise (8-hour time-weighted average sound level of 90 dBA) or an equivalent sound level of 99.4 during the 422 minute sampling period. Exposure calculation included a zero increment for the time not sampled. (a) Scragg mill operator - On or about May 20, 2015 employees were exposed to continuous noise at 204% of the permissible daily noise (8-hour time-weighted average sound level of 90 dBA) or an equivalent sound level of 95.1 during the 420 minute sampling period. Exposure calculation included a zero increment for the time not sampled. (a) Resaw operator - On or about May 20, 2015 employees were exposed to continuous noise at 195% of the permissible daily noise (8-hour time-weighted average sound level of 90 dBA) or an equivalent sound level of 94.9 during the 425 minute sampling period. Exposure calculation included a zero increment for the time not sampled. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 D04 II |
| Issuance Date |
2015-07-21 |
| Abatement Due Date |
2015-07-29 |
| Current Penalty |
2160.0 |
| Initial Penalty |
4500.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(d)(4)(ii): Lockout devices utilized were not affixed in a manner that held the energy isolating device in a safe or off position: (a) Sgagg Mill - On or about April 22, 2015 an employee was un-jamming the edger. The machine was turned off but not locked out. An employee climbed onto the edger started to fall and caught the guard on the motor resulting in an amputation to a finger. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A05 |
| Issuance Date |
2015-07-21 |
| Abatement Due Date |
2015-07-29 |
| Current Penalty |
1728.0 |
| Initial Penalty |
3600.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(5): Fan blade guards, where the periphery of the blades was less than seven feet above the floor or working level, had openings larger than one half inch: (a) Soap wash area - On or about May 20, 2015 fan blades on motor number 112379-00 were not guarded exposing employees to the hazard of being struck by the fan blades. (b) Sgagg Mill - On or about May 05, 2015 the pedestal fan blades had openings larger than one half inch lacked proper guarding exposing employees to the hazard of being struck by the fan blades. |
|
| Citation ID |
01005A |
| Citaton Type |
Serious |
| Standard Cited |
19100219 C04 I |
| Issuance Date |
2015-07-21 |
| Abatement Due Date |
2015-07-29 |
| Current Penalty |
1728.0 |
| Initial Penalty |
3600.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
8 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: (a) Sgagg Mill - On or about May 05, 2015 the rotating shafts on the trim saw lacked guarding exposing employees to the hazard of being entangled in moving parts. (b) Sgagg Mill - On or about May 05, 2015 rotating shafts on the edger lacked guarding exposing employees to the hazard of being entangled in moving parts. (c) Sgagg Mill lower level - On or about May 20, 2015 rotating shafts on the re-saw lacked proper guarding exposing employees to the hazard of being entangled in moving parts. |
|
| Citation ID |
01005B |
| Citaton Type |
Serious |
| Standard Cited |
19100219 C04 II |
| Issuance Date |
2015-07-21 |
| Abatement Due Date |
2015-07-29 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
4 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(4)(ii): The unused keyway(s) of projecting shaft end(s) were not filled up or covered: (a) Sgagg Mill - On or about May 05, 2015 the unused keyways of shaft ends at the edger lacked guarding exposing employees to the hazard of being entangled with moving parts. (b) Sgagg Mill - On or about May 05, 2015 the unused keyways of shaft ends on the trim saw lacked guarding exposing employees to the hazard of being entangled with moving parts. (c) Sgagg Mill - On or about May 20, 2015 the unused keyways of shaft ends on the re-sawr lacked guarding exposing employees to the hazard of being entangled with moving parts. (d) Sgagg Mill - On or about May 20, 2015 the unused keyways of shaft ends at the soap wash area lacked guarding exposing employees to the hazard of being entangled with moving parts. |
|
| Citation ID |
01006 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 F03 |
| Issuance Date |
2015-07-21 |
| Abatement Due Date |
2015-07-30 |
| Current Penalty |
1728.0 |
| Initial Penalty |
3600.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(f)(3): 29 CFR 1910.219(f)(3): Sprocket wheels and chains that were seven (7) or less feet from the floor or platform were not enclosed: (a) Sgagg Mill - On or about May 20, 2015 the chain and sprocket drive mechanism of the conveyor lacked guarding exposing employees to the hazard of being mangled by moving parts. |
|
| Citation ID |
01007 |
| Citaton Type |
Serious |
| Standard Cited |
19100242 B |
| Issuance Date |
2015-07-21 |
| Abatement Due Date |
2015-07-29 |
| Current Penalty |
1296.0 |
| Initial Penalty |
2700.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
2 |
| Nr Exposed |
20 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a) Scagg Mill - On or about May 20, 2015 employees were using air at 100 p.s.i. for cleaning. |
|
| Citation ID |
01008 |
| Citaton Type |
Serious |
| Standard Cited |
19100305 B02 |
| Issuance Date |
2015-07-21 |
| Current Penalty |
2160.0 |
| Initial Penalty |
4500.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(2): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: (a) Sgagg Mill - On or about May 05, 2015 the factory designed cover to the junction box on the side of a control panel had been removed exposing employees to the hazard of contacting energized parts. |
|
| Citation ID |
01009 |
| Citaton Type |
Serious |
| Standard Cited |
19260501 B10 |
| Issuance Date |
2015-07-21 |
| Current Penalty |
1728.0 |
| Initial Penalty |
3600.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels and 50-feet (15.25 m) wide or less, was not protected from falling by guardrail systems, safety nets: (a) Shed - On or about May 05,015 employees were replacing tin on a shed without fall protection. The roof was from 9 feet to 12 feet at the highest point. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19040039 A02 |
| Issuance Date |
2015-07-21 |
| Current Penalty |
432.0 |
| Initial Penalty |
900.0 |
| Contest Date |
2015-08-17 |
| Final Order |
2015-12-14 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours: (a) Site wide - On or about April 22, 2015 the employer had an employee with an amputation injury and did not report the incident to OSHA within twenty-hours. |
|
|
|
340596725
|
0419400
|
2015-04-30
|
872 DEPOT STREET, WOODVILLE, MS, 39669
|
|
| Inspection Type |
Unprog Other
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2015-04-30
|
| Emphasis |
N: AMPUTATE
|
|
