| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2012-12-19
|
| Emphasis |
P: FALL, L: FALL
|
| Case Closed |
2015-02-06
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19260025 A |
| Issuance Date |
2013-02-13 |
| Abatement Due Date |
2013-02-26 |
| Current Penalty |
918.0 |
| Initial Penalty |
1530.0 |
| Final Order |
2013-03-04 |
| Nr Instances |
6 |
| Nr Exposed |
7 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.25(a): During the course of construction, alteration, or repairs, form and scrap lumber with protruding nails, and all other debris, shall be kept cleared from work areas, passageways, and stairs, in and around buildings or other structures. (a) Construction Site - On or about December 19, 2012 employees were exposed to multiple fall and puncture hazards while working. Employees were exposed to falling on boards and boards with nail protruding from them. Six instances with boards with nails where obsered in different locations. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19260102 A01 |
| Issuance Date |
2013-02-13 |
| Current Penalty |
937.0 |
| Initial Penalty |
1561.0 |
| Final Order |
2013-03-04 |
| Nr Instances |
6 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.102(a)(1): Employees shall be provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents. (a) Front scaffold - On or about December 19, 2012 an employee was exposed to being struck by flying objects while using a nail gun. Employee was not wearing safety glasses. (b) Front of House - On or about December 19, 2012 employee was exposed to being struck by flying objects while using a circular saw. Employee was not wearing safety glasses. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19260451 B02 |
| Issuance Date |
2013-02-13 |
| Abatement Due Date |
2013-02-26 |
| Current Penalty |
551.0 |
| Initial Penalty |
918.0 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and walkway shall be at least 18 inches (46 cm) wide. (a) Front Scaffold - On or about December 19, 2012 one employee was exposed to a fall hazard while working a wooden fabricated scaffold with a walkway less than 18 inches |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19260451 G01 III |
| Issuance Date |
2013-02-13 |
| Abatement Due Date |
2013-02-26 |
| Current Penalty |
734.0 |
| Initial Penalty |
1224.0 |
| Final Order |
2013-03-04 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.451(g)(1)(iii): Each employee on a crawling board (chicken ladder) shall be protected by a personal fall arrest system, a guardrail system (with minimum 200 pound toprail capacity), or by a three-fourth inch (1.9 cm) diameter grabline or equivalent handhold securely fastened beside each crawling board; (a) Front Right Scaffold - On or about December 19, 2012 employees were exposed to a fall hazard of 13 feet while working on a crawling board (chicken ladder) scaffold. Employees were not protected from falling to lower level by a personal fall arrest system or a guardrail system. |
|
|
